DBN-3400 | DBNSL-3410 | DBNSL-3415 Super Chassis | Non-Slider Chassis | Double Drop A & B Train | Vacuum Trailers
Non-Slider Chassis
DBN-X11 Frame Spec Sheet (.pdf)
Non-Slider Chassis
Non-Slider Chassis DBN-X11 Frame, Three and Four Axel Chassis, Handles (one) 40′ Container.
- Length: 46′ – 53′
- Width: 96″ – 102″
- King Pin Location: 12″ – 36″
- Rear Axle Location: 25 1/2″
- Axle Spread: Optional
- Landing Gear Location: 138″
- Tare Weight: 10,000 lbs – 13,500 lbs.
- GVWR: 85,000 lbs.
Specifications
• MAIN FRAME AND TONGUE: formed I-beams made from high yield structural steel
• 3/16” & 1/4 ” formed channels
• KING PIN: 2” X 3/8” bolster on 1/4” 5th wheel plate
• LANDING GEAR: HOLLAND 2 speed
• TWIST LOCKS: BUFFERS #3960
• SUSPENSION: Hutch spring suspension, Ridewell Ridelite air ride optional
• DROP AXLE: Ridewell 232 HMT optional
• AXLES: 77.5” or 71.5” Track, 1/2″ or 5/8” wall, steel hub pilot hubs, cast drums, ”Q” series 16.5” X 7” brake shoes, 30-30 spring brake chambers, auto slack adjusters
• WHEELS: 22.5 X 8.25 steel powder coated, Aluminum optional
• TIRES: 255/70R22.5, 295/75R22.5, 385/65R22.5, 445/50R22.5
• BRAKE SYSTEM: MERITOR/WABCO 2S2M premium ABS system
• ELECTRICAL: JKD 7 wire sealed harness, sealed ABS wire harness
• LIGHTS: 4” JKD LED tail lights, 2” JKD led beehive maker lights, mid trailer oval turn signal, DOT approved 1 1/2” & 2” conspicuity tape
• METAL PREP: sand blast
• PRIMER: PPG 2 Part epoxy 400,401
• PAINT: Polyurethane top coat black in color, other colors optional
• MUD FLAPS: DIONBILT 30”
