DBNSL-3410 | DBNSL-3415 Super Chassis | Non-Slider Chassis | Double Drop A & B Train | Vacuum Trailers

Vacuum Trailers

Three or Four Axle 48′ | Two or Three Axle 40′

45’160 BBL 3 Axle Air Ride (.pdf)

‘160 BBL 4 Axle Air Ride (.pdf)

Vacuum Trailer - Two Axle 40'

Vacuum Trailer – Two Axle 40′

Two Axle 40′ Vacuum Trailer

  • Length: 40′
  • Width: 102″
  • King Pin Location: 18″
  • Rear Axle Location: 36″
  • Axle Spread: 49″
  • Landing Gear Location: 138″
  • Tare Weight: 19,000 lbs.
  • GVWR: 80,000 lbs.

MAIN FRAME: Incorporated tube and frame rails that run the length of trailer.

• 3/16″ & 1/4″ Formed Channel.

KING PIN: 2″ x 3/8″ Bolster on 5/16″ bolted 5th wheel plate.

LANDING GEAR: Butler 2 Speed Gear Drive 15,000# Static.

SUB FRAME: Formed L Channel Fully Welded to Frame Rails with Dionbilt Design Weight Saving Cross Members.

SUSPENSION: Hutchens 9700 Series Three Axle 49″ Spread Heavy Duty 8 Leaf Springs.

DROP AXLE: Optional Ridewell 230 Trailer Mount.

AXLES: 77.5″ Track, 5/8″ Wall, 25,000# Rating, Steel Hub Pilot Hubs, Cast Drums, “Q” Series 16.5″ x 7″ Brake Shoes, 30-30 Spring Brake Chambers, Auto Slack Adjusters Long Wheel Studs for Easy Upgrade to Aluminum Wheels Later.

WHEELS: 22.5 X 8.25 Steel white powder coated.


BRAKE SYSTEM: Meritor Wabco 2S2M Premium ABS System, Sealco Spring Break Valves, Bendix Heated Automatic Reservoir Drain Valve.

ELECTRICAL: JKD 7 Wire sealed harness , sealed ABS harness.

LIGHTS: 4” JKD LED Tail lights, 2” LED JKD BEE Hive marker lights, D.O.T. approved 1 ½” & 2” Conspicuity tape, LED Beacon rotating light mounted on the top rear of trailer, Maximma LED ultra bright work light mounted on the sides of  tank facing downward to work area, angled to eliminate as much shadow as possible.

CAT WALK: Trailer length Cat Walk with round tube hand rail, form rolled for a clean look, Cat Walk and steps are made from aluminum grip strut for maximum tread grip, toe board incorporated into hand rail.

METAL PREP: Sand blast clean.

PRIMER: PPG 2 Part Epoxy 400, 401.

PAINT: Sherwin Williams polyurethane top coat Dionbilt Blue.

INNER COATING: Sherwin Williams 12 Mil. Epoxy Coating Rated for Oil Field Use.

MUD FLAPS: Dionbilt 30” anti spray.

    • RIDEWELL Air Ride Suspension, Lift Axle System Available.
    • RIDEWELL Steerable Drop Axle.
  • VACUUM PUMP – Trailer Mounted Heavy Duty.
    • FRUITLAND RCF 500 Series
    • MASPORT VK650
    • 12’, 15’, 20’ Lengths available in 4” OR 3” Gates, Super Vac Industrial hose
Bakken Package

This package is a work in progress, as we learn, we will adapt our product so we at Dionbilt can service the cold weather users to the fullest. We have designed our trailer with the latest ideas from the filed, like the propane tank holder integrated with a fire extinguisher for safety. Heat strips on the sump tubes that are fully insulated and wrapped in an enclosure for maximum heat transfer to the vales, eliminating the need to use an open flame to defrost your rear valves. Air system automatic reservoir drain valve with heater safety switches to turn this system off during the warm weather or maintenance.


Check out our Flickr Gallery.

Link to my Flickr Page